MB Stone Care MB-11 Touch-Up Marble Polishing Powder (8oz.)
USD $41.95
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
MB-11 Touch Up is a
unique combination of specialty abrasives and catalysts that make the art of
marble polishing relatively easy to implement without the need
of any power tool. MB-11 Touch Up is designed for spot polishing of
most “water stains” or “rings” from polished marble, travertine, and any other
calcite-based stone. Works best on lighter stones. All powders are
packed by weight and not by volume Directions for use Be certain to test product first on a spare tile or inconspicuous
area for extra caution before use. Use rubber gloves at all times when handling the product HOW IT WORKS VIDEO BELOW
Facebook Live MB-11 Demo
Video will open in a new window
Using the mobile app? Copy this link into your browser: . EASY STEPS 1.) Apply approximately 1/8 teaspoon of powder to the dull spot to be restored. 2.) Using a spray bottle, spray a mist of water over the powder, making sure all the powder is moistened. If you do not have a spray bottle, you can pour a few drops of water onto the powder from a cup. 3.) The mixture should be a wet paste consistency. Using a clean, slightly moistened white piece of cotton cloth (a washcloth will do fine), rub until the area treated is dry. 4.) To finish with a “professional touch”, spray a bit more water to the area being treated, then using the same part of the cloth with product residue, rub in circles (with a little pressure). 5.) Then use a fast back and forth motion (with more pressure) until the stone surface is dry and shiny. This will make for a perfect blend. 6.) Repeat the process if needed. For the final cleaning, to eliminate any residue, spray a little MB-5 Stone & More Multi Surface Spray Cleaner, then rub it dry. To determine if you need to seal your stone, try doing a water test on the stone's surface. Pour a little more than a tablespoon of water onto the area to be tested and let stand for approximately 10 to 15 minutes. Check to see if the water has absorbed any. If it looks the same, then you probably do not need to seal the stone's surface. Another way to verify your findings, is to wipe away the water with a dry cloth and see if the stone looks darker. If the color hasn't changed, then you are still good to go without sealing. If the stone seems to look darker in color, then you would benefit in sealing the stone's surface. We would recommend using MB-24 Barrier to seal your stone's surface after using the MB-11 Touch Up and MB-5 Stone & More. *Due to the pandemic and its problems Please be advised* You may be experiencing shipping delays
Facebook Live MB-11 Demo
Video will open in a new window
Using the mobile app? Copy this link into your browser: . EASY STEPS 1.) Apply approximately 1/8 teaspoon of powder to the dull spot to be restored. 2.) Using a spray bottle, spray a mist of water over the powder, making sure all the powder is moistened. If you do not have a spray bottle, you can pour a few drops of water onto the powder from a cup. 3.) The mixture should be a wet paste consistency. Using a clean, slightly moistened white piece of cotton cloth (a washcloth will do fine), rub until the area treated is dry. 4.) To finish with a “professional touch”, spray a bit more water to the area being treated, then using the same part of the cloth with product residue, rub in circles (with a little pressure). 5.) Then use a fast back and forth motion (with more pressure) until the stone surface is dry and shiny. This will make for a perfect blend. 6.) Repeat the process if needed. For the final cleaning, to eliminate any residue, spray a little MB-5 Stone & More Multi Surface Spray Cleaner, then rub it dry. To determine if you need to seal your stone, try doing a water test on the stone's surface. Pour a little more than a tablespoon of water onto the area to be tested and let stand for approximately 10 to 15 minutes. Check to see if the water has absorbed any. If it looks the same, then you probably do not need to seal the stone's surface. Another way to verify your findings, is to wipe away the water with a dry cloth and see if the stone looks darker. If the color hasn't changed, then you are still good to go without sealing. If the stone seems to look darker in color, then you would benefit in sealing the stone's surface. We would recommend using MB-24 Barrier to seal your stone's surface after using the MB-11 Touch Up and MB-5 Stone & More. *Due to the pandemic and its problems Please be advised* You may be experiencing shipping delays
Returns Accepted for this item if it's within 14 Days
Price type
IN STOCK
OUT STOCK
.
