Drill Chuck for Benchtop Polisher by Eurotool Motor Accessory 1/4"

DRILL CHUCK FOR BENCH-TOP  POLISHER MOTOR ATTACHMENT This chuck is made to be used on the Eurotool bench top polisher. The chuck attachment is made to be used on the Right Hand side of the motor (Facing the Motor from the Front). The chuck has a capacity range of - 0.6mm to 6.5mm (1/4").t-hand side for clockwise drilling. The chucks arbor shaft length is 1-3/8" with 2 set screws to attach it to the motor shaft, the hole size is 5/16 "ID. Chuck comes with chuck key and wrench, to attach to the Benchtop Polisher shaft.   Note: Always slightly tighten the front most set screw and then the one closest to the motor. Final tightness should be done after both are equally tight. SAFETY: We recommend that this chuck be used at a moderate speed (Never on Maximum) due to its weight, Safety Factors must be considered. This item is for Polisher listed with eBay item number: 193528016811 ​ SPECIFICATIONS: Jets Product # 0615-902605  Made by Eurotool POL-260.05 - Chuck Capacity: 0.6 – 6.5mm  3/64" – 1/4" - Overall Length: 3-11/32" - 85mm - Chuck Body Diameter: 1-11/64" - 30mm - Arbor Body Diameter: 19/32" - 15mm - Arbor Body Length: 1-3/8" - 35mm - Arbor Hole: 5/16" – 7.94mm  for Shaft Connection - Weight: 5oz. - 144gr Sale is for Chuck NOTE: Visit JETSINC. ebay Store Listings, where you can see many more Polishing and Grinding supplies including Spindles, Flex Shaft motors, Rotary Handpieces and Accessories, along with a selection of J ewelers E quipment T ools and S upplies . JETS Inc. B7  720 CKSP

Returns Accepted for this item if it's within 30 Days